Madaidaicin Matsakaicin Sarrafa Nau'in dumama da sanyaya madauwari
Cikakken Bayani
Wannan injin yana da amfani ga mai sarrafa gilashin jaket don ƙarancin zafin jiki da yanayin sanyaya.An rufe duk hanyar hawan keke, tankin faɗaɗa da hawan keke adiabatic ne, haɗin injin ne kawai.Komai zafin jiki yana da girma ko ƙasa, ana iya canza injin ɗin kai tsaye zuwa yanayin sanyi da sanyaya idan yana ƙarƙashin yanayin zafi mai girma.
Ruwan zagayawa yana rufe, babu tururi da ke shiga ƙarƙashin ƙarancin zafin jiki kuma babu hazo mai da aka samar a ƙarƙashin matsanancin zafi.Mai sarrafa zafi ya haifar da yanayin zafi mai faɗi.Ba a yi amfani da bawuloli na inji da na lantarki a cikin tsarin kewayawa.
| Wutar lantarki | 2KW-20KW |
| Sarrafa Daidaitawa | ± 0.5 |
| Matsayin atomatik | Na atomatik |
Bayanin samfur
● Halin Samfur
| Samfurin Samfura | JLR-05 | JLR-10 | JLR-20/30 | JLR-50 |
| Yanayin Zazzabi(℃) | -25 ℃ ~ 200 ℃ | -25 ℃ ~ 200 ℃ | -25 ℃ ~ 200 ℃ | -25 ℃ ~ 200 ℃ |
| Daidaitaccen Sarrafa (℃) | ± 0.5 | ± 0.5 | ± 0.5 | ± 0.5 |
| Ƙarfafa a cikin Zazzabi Mai Sarrafa (L) | 5.5 | 5.5 | 6 | 8 |
| Ƙarfin sanyi | 1500-5200 | 2600-8100 | 11kw~4.3kw | 15kw~5.8kw |
| Gudun Ruwa (L/min) | 42 | 42 | 42 | 42 |
| Daga (m) | 28 | 28 | 28 | 28 |
| Ƙarfin Talla (L) | 5 | 10 | 20/30 | 50 |
| Girma (mm) | 600x700x970 | 620x720x1000 | 650x750x1070 | 650x750x1360 |
| Samfurin Samfura | Saukewa: JLR-100 | Saukewa: JLR-150 | Saukewa: JLR-200 |
| Yanayin Zazzabi(℃) | -25 ℃ ~ 200 ℃ | -25 ℃ ~ 200 ℃ | -25 ℃ ~ 200 ℃ |
| Daidaitaccen Sarrafa (℃) | ± 0.5 | ± 0.5 | ± 0.5 |
| Ƙarfafa a cikin Zazzabi Mai Sarrafa (L) | 8 | 10 | 10 |
| Ƙarfin sanyi | 18kw ~ 7.5kw | 21kw~7.5kw | 28kw ~ 11 kw |
| Gudun Ruwa (L/min) | 42 | 42 | 50 |
| Daga (m) | 28 | 28 | 30 |
| Ƙarfin Talla (L) | 100 | 150 | 200 |
| Girma (mm) | 650x750x1360 | 650x750x1360 | 650x750x1370 |
FAQ
1. Shin kai kamfani ne ko masana'anta?
Mu masu sana'a ne na kayan aikin lab kuma muna da masana'anta.
2. Yaya tsawon lokacin bayarwa?
Gabaɗaya yana cikin kwanaki 3 na aiki bayan karɓar kuɗin idan kayan suna hannun jari.Ko kuma kwanakin aiki 5-10 ne idan kayan sun kare.
3. Kuna samar da samfurori?ya kyauta?
Ee, za mu iya bayar da samfurin.Idan aka yi la'akari da ƙimar samfuranmu, samfurin ba kyauta bane, amma za mu ba ku mafi kyawun farashin mu gami da farashin jigilar kaya.
4. Menene sharuɗɗan biyan ku?
Biyan kuɗi 100% kafin jigilar kaya ko azaman sharuɗɗan tattaunawa tare da abokan ciniki.Don kare amincin biyan kuɗin abokin ciniki, odar Tabbacin Ciniki yana ba da shawarar sosai.
